Publicidad
FF150G
PART NUMBER
DESCRIPTION
F31051-350
NYLOCK LOCKNUT M10 x 1.5 Gr 8.0 Z
F40310-020
WASHER FLAT M10 GR 4.6 Z
F11534-350
HCS M10 x 25 x 1.5 Gr 8.8 Z
G0124
Spiral Wrap - 8 Inch
A00180-75AG00
Hollow Rubber Spring
K10547LH-003
FF150G WELDMENT LH PAINTED
K10547RH-003
FF150G WELDMENT RH PAINTED
K10548-003
FF150G WELDMENT PAINTED
B90223
10-3/4 x 9-1/2 x 7 DW Carton
B10100
NEWSPRINT 18" ROLL
B00029-010
BARCODE LABEL FOR KIT
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email sales@timbren.com
QTY
LOCATION
4
I1D
4
I1D
2
I1C
1
G2A
2
C3B
1
D14D
1
D14C
4
D19B
1
A1A
1
1
Issued:
10/15/2015
TIMBREN INDUSTRIES INC.
www.timbren.com
ASSEMBLY NOTES:
APPLY 'LEFT' LABEL TO L/H BRACKET
Publicidad
