Parts Included; Tools Required - HyLoft 80842-10 Instrucciones De Montaje

Height
adjustable
from 17"-26"

Parts Included:

(4) Downrods
(2) Left Side Support Bars
(20) Hex Bolts 1/4" x 1-1/4"
Use 7/16" Wrench

Tools Required:

3/16"
Hand or
Drill Bit
Power Drill
Page 2
ASSEMBLY INSTRUCTIONS
Ceiling Storage Racks
Mount to
any Ceiling
Joists
IMPORTANT: Read through entire instructions before beginning any installation.
(2) Left Side Corner Rods
(2) Right Side Support Bars
(2) 7/16", & (1) 1/2"
Wrench, Socket Wrench or Nut Driver
There is no need to return this item to the store.
Mount from 28" to 38"
apart (from outside
edges of ceiling plates)
(20) 1/4" Flange Nuts
Use 7/16"
Wrench
Stud/Joist Framing
Finder Square
(optional) (optional)
Item #: 80842-10 & 80843-10
MISSING A PART?
Instead call our TOLL FREE HOTLINE:
1-800-253-1561
Ceiling Installation Shown
See page 4 for alternate
installation on to
existing rack
(2) Right Side Corner Rods
(8) Lag Screws 5/16" x 2-1/2"
Use 1/2"
Wrench
HyLoft Sticker
Eye Protection
Pencil
Tape Measure
Ladder or
Step Stool