Playing A Disc; Region Codes - Philips LX3600D Guía De Utilización Rápida

Make sure your DVD system
and TV are connected and
turned on!

Playing a disc

1
Press DISC on the remote control.
You can also adjust the SOURCE button on the front panel until "DISC" appears on the display
panel.
2
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (if no disc in the DVD system).
3
Press OPEN/CLOSE 0 on the front of the DVD system and load a disc,
then press OPEN•CLOSE 0 again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face up.
4
Playback will start automatically.
If a disc menu appears, use 3 4 1 2 buttons on the remote to make the necessary selection, then
press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the
instructions given in the disc menu.
5
To stop playback, press STOPÇ.

Region Codes

DVDs must be labelled for ALL regions or for Region 2 in
order to play on this DVD system.
* Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or
VIDEO.
* Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see
the Video In channel.
* Or, your TV remote control may have a button or switch that chooses different video modes.
* See your TV manual for more details.
Detailed playback features and additional functions are described in the
No picture?
Check the AV (Audio/Video) mode on your TV.
accompanying owner's manual.
2
ALL