Toshiba A100 Guia De Inicio Rapido página 3

NOTE: PLEASE MAKE SURE TO BACK UP ALL DATA ON YOUR STORAGE
DEVICE PRIOR TO INSTALLING THE SSD TO A DESKTOP PC.
SSD connection
1. Making sure the PC is powered off, mount the SSD onto a PC bracket.
2. Connect the SSD with the SATA signal cable to the SATA connector in
your PC.
3. Connect the SSD and PC power supply using the SATA power cable.
4. Power on your PC. Make sure all the application programs are closed.
Con gure SSD as primary boot device
1. With the PC turned off, remove the HDD from the PC's storage bay, or
leave it as a secondary storage.
2. Power on your PC and configure the SSD as primary boot device in the
BIOS menu.
3. Restart your PC.
SC7173-A3.indd 3
SATA signal cable SATA power cable
(not included) (not included)
Installing the SSD to a desktop PC Installing the SSD to a notebook PC
NOTE: PLEASE MAKE SURE TO BACK UP ALL DATA ON YOUR STORAGE
DEVICE PRIOR TO INSTALLING THE SSD TO A NOTEBOOK PC.
Replace the internal HDD with SSD
1. With the PC turned off, remove the HDD from the PC's storage bay.
2. Install SSD in the PC by aligning and firmly connecting the SATA
connector of the SSD with your PC SATA connector.
3. Close the cover of the storage bay, and turn on your PC.
3
Black
2017/08/09 20:2