Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
mode.
In AUX mode, all functions are controllable only from the external device.
»
EXTERNAL MICROPHONE
Connect the included microphone connector to the 6.34 mm port on the
»
speaker.
Use the MIC ECHO (+/-) button to set the microphone echo effect to the
»
desired level.
EQ
Long press the EQ button to switch between SITE and BASS modes. In AUX
»
mode, the EQ function is not available.

POWER SUPPLY

To power the speaker, use the USB cable and the 5V-230V adapter included
»
in the package.
While charging the battery, the red LED under the DC 5V port will turn
»
on. When the battery is fully charged, the LED will turn off. The maximum
charging time is 6 hours. The maximum time of use of the speaker with the
battery charged 100% is about 2 hours (with the maximum volume).
Note: If you listen to music while charging the device, please put the volume to middle,
because for some music with heavy bass, the charger may fail to supply the high current
needed under the maximum volume.
5
User manual

Publicidad

loading