Front View; Rear View; Function - Gemini PMX-10 Manual Del Usuario

4
FUNCTION ENGLISH //
TOP VIEW
1. Effect 1 Button ON / OFF
Turns Effect 1 ON or OFF
2. Effect 1 Knob
Controls value of Effect 1
3. Effect Button 2 ON / OFF
Turns Effect 2 ON or OFF
4. Effect Knob 2
Controls value of Effect 2
5. Loop Size Encoder
Turn to increase or decrease loop size
6. Loop Button ON / OFF
Turns looping for associated deck ON or
OFF
7. Hotcues Mode Button
Switches buttons 1-8 to HOTCUE mode
8. Samples Mode Button
Switches buttons 1-8 into SAMPLES mode
9. Hotcue Buttons
Triggers or sets Hotcues
10. Channel Gain Knob
Turn to change input gain of channel
11. High Frequency EQ Knob
Turn to adjust the High EQ value
12. Mid Frequency EQ Knob
Turn to adjust the Mid EQ value
13. Low Frequency EQ Knob
Turn to adjust the Low EQ value
14. Dual Pole (HP/LP) Filter Knob
Turn to adjust filter for selected channel
• Center - No Filter Effect
• Clockwise from center – High-pass
Filter
• Counter-Clockwise from center – Low-
pass filter
15. CUE / PFL Button
Press to insert channel into Cue (PFL) bus
16. 45mm Channel Fader
Move to increase or decrease volume for
selected channel
17. Channel LED Meter
Shows pre-fader level of selected channel
18. Load Deck 1 Button
Loads selected track into Deck 1 Player
19. Load Deck 2 Button
Loads selected track into Deck 2 Player
20. Track Search Encoder
Turn to scroll through library / Press to
enter a directory
21. Back Button
Press to go back one directory
22. Master Volume Knob
Turn to increase Master Output Volume
23. Booth Volume Knob
Turns to increase Booth Output Volume
24. Mic Level Knob
Turn to increase volume of attached
Microphone
PMX-10
DIGITAL PERFORMANCE MIXER
25. Cue Split Knob
Splits cue between Cue and Program
26. Cue Level Knob
Turn to increase or decrease volume of
Cue
27. Master LED Meter
Shows level of Master Output
28. 45mm Crossfader
Move to select channel audio sent to
Master

FRONT VIEW

29. CH1 Fader Reverse Switch
Reverses fader direction on CH1
30. Crossfader Reverse Switch
Reverses fader direction on crossfader
31. CH2 Fader Reverse Switch
Reverses fader direction on CH2
32. CH1 Fader Curve Switch
Switches CH1 fader between sharp or
loose curve
33. Crossfader Curve Control Knob
Adjusts crossfader curve from loose to
sharp
34. CH2 Fader Curve Switch
Switches CH2 fader between sharp or
loose curve
35. Headphones Output Jacks
Supports both 1/4" and 1/8" headphones

REAR VIEW

36. Power Button
Turns mixer ON or OFF
37. Master XLR (Balanced) Outputs
Professional-grade stereo outputs
38. Master RCA (Unbalanced) Outputs
Consumer quality Stereo outputs
39. Booth Output
Output for monitoring speakers
40. Record Output
Output for recording devices
41. USB Type-B Connector
To connect PMX-10 to a computer
42. CH2 Line / Phono Switch
Switch to control level of CH2 input
43. CH2 RCA Inputs
Input for CH2 Source
44. CH1 RCA Inputs
Input for CH1 Source
45. CH1 Line / Phono Switch
Switch to control level of CH1 input
46. Microphone Input Combo Jack
Connect XLR or 1/4" Dynamic
Microphone
47. IEC 3-Prong Mains Power connector
Mains AC Power connector
48. Ground for use with TT sources
49. Kensington Lock Connection
Connect Kensington Lock to secure mixer