Cleaning And Care - Klarfit 10031106 Manual Del Usuario

Heating Key
The default is in the opening status, the sole heating function automatically open, light
blue; press the heating key, can close the heating function, once the light close, the heating
function stop.
Power Switch
• The foot massage connect to the power supply, is on the ready mode, red light flashing.
• Press the power button, the foot massage start working (heating + in the air waving +
mode 1), All lights light up, the default time last 10 minutes.
• Working time finish, or the setting time reaches, foot massage returns to the ready mode.
red light flashing.
• Finish using the foot massage, please close the power by getting out the plug from the
socket
Storage
• When no using, put the massage in the box and keep it in the safe, dry, airy and cool
place.
• Don't tweak the wire.
• Do not use wire hanging products.
• Avoid sharp points scraping the surface broken.
• Please do not place the product in direct sunlight or high temperature place.
Cleaning
• Before cleaning, please make sure the power switch is closed, and pull out the power
plug.
• Please use dry cloth to clean the massage surface. Do not use corrosive cleanser, such as
Benzene or thinner cleanser.
Care
• Keep the product clean and far away from the wet place.
• If long time not use this product, please use dust cover trapping the massagers, prevent
the dust fall into.
10

Cleaning and Care