ENGLISH
Cleaning and maintenance
Cleaning the dust bowl (fig. H, I, J, K, )
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care
and regular cleaning
Release the door latch (7) and open the transparent door
u
(5) 180° until it clicks in the open position.
Empty the dust container by lightly shaking over a dustbin
u
Close the transparent door (5) and make sure that it clicks
u
into place.
Cleaning the filters (fig. L, M, N, O, P,
Q, R, S, T )
Press the bowl release button (8) (fig. L)
u
Rotate bowl (fig. M)
u
Seperate dust bowl from appliance (fig. N).
u
Clean the filter by rotating 3 times anti-clockwise
u
(fig. O).
Lift the filter from the dust bowl (fig. P) and brush off any
u
loose dust.
Empty any remaining dust from the dust bowl (fig. Q).
u
Ensure the dust bowl is open (fig. R).
u
Rinse out the dustbowl with warm soapy water (fig. S).
u
Wash the filters with warm soapy water (fig. T).
u
Make sure the filters are dry
u
Refit the filters onto the appliance twisting them clockwise
u
until they lock into place.
Close the dustbowl door. Make sure the release latch (8)
u
clicks into place.
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth. Do
not use any abrasive or solvent-based cleaner. Do not im-
merse the appliance in water
Replacing the filters
The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
your BLACK+DECKER dealer (cat. no PD10):
Remove the old filters as described above.
u
Fit the new filters as described above.
u
8
(Original instructions)
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local BLACK+DECKER office at the
address indicated in this manual. Alternatively, a list of author-
ised BLACK+DECKER repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical Data
Voltage
Weight
PD1200AV
12V
1.49Kg