Lamp Replacement - Klarstein ILONA BRILLIANT EDITION Manual Del Usuario

EN
30

LAMP REPLACEMENT

• The lamp must be replaced by the manufacturer, costumer service or a similarly
qualified person.
• Always switch off the appliance and unplug the power cord from the wall outlet
before carrying out any work on the appliance.
• When handling lamp, make sure it is completely cool down before any direct
contact to hands.
• Do not touch the lamp with bare hands, but use a cloth or gloves to ensure that the
lamp does not come into contact with sweat, as this may shorten the life of the lamp.
• Protect yourself from danger when replacing the lamp, e.g. by wearing gloves.
Proceed as follows:
1. Open the lamp plate, use a screwdriver to remove the 4 screws (ST 4*8 mm) on
the lamp plate assembly.
2. Then remove the lamp plate assembly and slowly pull out the light line, and
dismantle the terminal base of the light connection line.
3. Apply the reverse procedure to install the light back.
Technical data – lamp
ILCOS D code
LED modules
Max wattage
Voltage range
Dimensions
10035188
DSS-18/65-S-448/315
LED lamp plate
18 W
DC 12 V
448 × 315 mm
10035189
DSR-25/65-S-685/315
LED lamp plate
25 W
DC 12V
685 × 315 mm