Operation - Yard force YF8000 Manual De Instrucciones

ASSEMBLY
3. Fit the funnel cover over the funnel. Make sure the locking tabs on the funnel cover
are securely attached to the funnel (Fig. 12).
Fig.12
USING THE COLLECTING BAG
NOTE: This unit does not come with a leaf collecting bag. See below for an example on
how to attach your leaf collecting bag.
1. Place the bag opening around the motor housing, then use the elastic strap to tighten
the bag, ensure the bag connects with the housing firmly (Fig. 13).
Fig.13
Put the edge of bag under
the elastic straps
11

OpERATION

ON/OFF SWITCH
The On/Off switch is located on the lower side of the motor housing portion of the power
head. To turn on the leaf shredder, push the green button. To turn off the leaf shredder,
push the red button (Fig. 14).
Fig.14
Circuit breaker On/Off button
NOTE: If the unit stops unexpectedly, push the red button, wait 1 minute and then press
the circuit breaker.
CaUTiOn
To prevent exposure to dusty air, don't stand in front of the motor
ventilation slots.
LOADING YOUR MACHINE
With the leaf shredder running, feed double-handfuls of dry leaves, or single-handfuls of
wet leaves, into the funnel. Allow the machine to shred the load completely and regain
speed before inserting the next handful. Do not overload the machine by letting it labor at
low speed: this may cause the motor to stop. If this happens, turn the switch off, unplug
the machine, clear the unshredded material from the funnel, restart the machine, and
continue with your shredding.
Warning
Filling mulcher with unshredded material at a rate faster than the
machine can handle may result in permanent damage to your motor.
Always wear protective glasses and a mask.
12