Cleaning & Maintenance - Revamp DR-4000 Guia Del Usuario

• The Progloss Advanced Protect and Care hair dryer comes with 2 speeds and 4 heat
settings including cool shot
SPEED
Off
Medium speed
High speed
• To use the Advanced Care system programs:
• Press once, the "Advanced Care" button on the side of the hair dryer to select the
"Gentle" program – the LED "Gentle" indicator, located on top of the handle, lights
up and the grill of the hairdryer starts oscillating to gently diffuse the heated
airflow with a larger and more even head coverage.
• Press twice the "Advanced Care" button on the side of the hair dryer to select the
"Strong" program – the LED "Strong" indicator, located on top of the handle, lights
up and the grill of the hairdryer starts oscillating to actively diffuse the heated
airflow on a larger and more even head coverage.
• Press three times the "Advanced Care" button on the side of the hair dryer
to select the "Care+" program – the LED "Care+" indicator, located on top of the
handle, lights up and the grill of the hairdryer starts gently oscillating, more
strongly oscillating and then gently again, before pausing, to actively diffuse the
heated airflow on a larger even head coverage.
• To turn off the Advanced Care system, press four times the "Advanced Care"
button on the side of the hair dryer.
• The Progloss Advanced Protect and Care hair dryer comes with a 360° rotating head
that allows you to direct the airflow in the direction wanted (side to side or up and
down). Rotate the head of the hairdryer by manually holding the blue ring at the front
of the head of the product.
• IMPORTANT: PLEASE ONLY ROTATE THE HEAD OF THE HAIR DRYER WHEN THE PRODUCT IS
TURNED OFF AND COOL.
• To use the Cool Shot, click on the button at the front of the hairdryer. This will cool the
hair and help to set the style. Click off to revert to normal hair drying.
• IMPORTANT: PLEASE NOTE THAT IF THE HAIRDRYER IS BLOWING OUT COLD AIR, IT IS LIKELY
THAT THE COOL SHOT HASN'T BEEN CLICKED OFF.
• After use, switch off the dryer by switching the speed setting to 0, unplug and allow to
cool before storing away.
Follow us on www.revamphair.com for the latest hair tips and advice.
PLUG (DR-4000-GB ONLY)
This unit comes with a removable UK
3-pin plug. The 3-pin plug can be removed
to reveal a European 2-pin plug by
unscrewing the centre screw, lifting the
rear cover and unclipping the European
2-pin plug. It can be replaced if necessary,
by reversing this procedure. If required
replace plug fuse with one the same value
If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug, fitted
with a BS 1362 fuse. Please use the same value of fuse supplied. Care must be taken when
changing the plug. If in doubt, contact a qualified electrician.
CLEANING & MAINTENANCE
• If you just use the appliance, switch it off, unplug from the mains and allow to cool fully
before cleaning.
• Wipe over all surfaces using a soft damp cloth. Do not use harsh abrasives or cleaners.
• Do not immerse the appliance in water or and other liquid.
• Ensure all parts are dried thoroughly with a soft towel before reusing.
• To prevent cord damage, do not wrap the cord around the appliance, always store the
cord loosely next to the appliance.
• Store in a cool dry place.
:
HEAT
Low heat
Medium heat
High heat (for faster drying)