UNAcare wheel Mini Manual Del Usuario página 16

Assemble the central adapter
3.3.3
1
Loosen the 4 bolts on the top part of the central adapter. Use a 4 mm Allen wrench.
2 Loosen the 4 bolts on the bottom part of the central adapter. Use a 3 mm Allen
wrench.
3
3 Measure distance between centers of wheelchair tubes where clamps are
mounted. For 300 - 355 mm (11-3/4" - 14") use standard curved tubes, for 355-435
mm (14" - 17-1/8") use optional XL curved tubes.
4 Insert the long ends of the curved tubes approx. 5 cm into the central adapter.
5 Lightly tighten all 8 bolts of the central adapter.
16
4