Publicidad
Idiomas disponibles
Idiomas disponibles
21"
(53.3 cm)
1"
(2.5 cm)
8" (20.3 cm)
2-1/2"
(6.4 cm)
Product Information
Applicable product:
Drop-in rim style
Tile flange, left drain
Tile flange, right drain
Fixture*:
Bathing well:
Basin area, bottom
46" (116.8 cm) x 21" (53.3 cm)
Basin area, top
55" (139.7 cm) x 31" (78.7 cm)
Weight
67-1/2 lbs (30.6 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
57 gal (215.8 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/4" (148 cm) x 40-1/2" (102.9 cm)
Pump:
V
1-speed
120
Minimum access panel
pump/control (required):
1014732-1-B
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1126P
K-1126P-L
K-1126P-R
Hz
A
60
7.5
20" (50.8 cm) W x
15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
Pump/Control Access
(If Apron Is Not Used)
20" (50.8 cm) W x
15" (38.1 cm) H
18-1/8"
16-5/8"
(46 cm)
(42.2 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
33 lbs/square foot (159 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
This fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
2
1-1/4"
(3.2 cm)
Tile Flange
Detail
1-1/2"
(3.8 cm)
42" (106.7 cm)
Drop-in Rim
Detail
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.
Publicidad
