Casals CSS710VCE Manual Del Usuario página 6

- Do not use the appliance if the accessories or con-
sumables attached to it are defective. Replace them
immediately.
- Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
- Unplug the appliance from the mains before replac-
ing any accessory.
- This appliance is for professional use.
- This appliance is intended for adult use. Ensure that
this product is not used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children should be su-
pervised to ensure that they do not play with the ap-
pliance.
- Do not expose the appliance to extreme tempera-
tures.
- Keep the appliance in a dry, dust-free place, out of
direct sunlight.
- Always check the workpiece before operation and
remove any obstructions such as nails, staples,
screws, string, rags, cloths and other debris.
- Never rest the appliance into a surface while in use.
- Do not use the appliance on any part of the body of
a person or animal.
- Let the appliance running with no load for 30 sec-
onds in a safe position. If you notice serious vibration
or other defects stop the appliance immediately. Then
check the problem and /or proceed as we describe on
Anomalies and Repair clause.
Product description and Specifications
Description (Fig. A, B, C, D, E)
1- On/Off Switch
2- Locking button
3- Speed dial adjustment
4- Rear handle
5- Lateral handle
6- Carbon brush lid
7- Pad cover
8- Viscid disc
9- Sand Paper
10- Lid
11- Knob
12- Dust outlet
Instructions for use
Before use:
- Make sure that all the product's packaging has been
removed.
6
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the ap-
pliance.
Sand paper Replacement (Fig B)
- To remove the sand paper (9) grasp it and pull it off
from the Viscid disc (8).
- Pay attention that punched holes of the sand paper
(9) match with the holes of the Viscid disc (8).
- Position the sand paper (9) flush alongside one edge
of the Viscid disc (8).
- Lay the sand paper (9) onto the Viscid disc (8) and
press firmly.
- To remove the sand paper (9) grasp it and pull it off
from the Viscid disc (8).
Replacement of Viscid disc (Fig B)
- Remove the sand paper (9).
- Block the rotation of the viscid disc (8)
- Put the allen wrench in to the hexagon hole in the
center of the viscid disc (8)
- Rotate the allen wrench clockwise
- Remove the old viscid disc (8)
- Install the new viscid disc (9)
Electronic speed control (Fig A)
- The speed of the appliance can be regulated by
using the speed regulator control (3). This function
is very useful, as it makes it possible to adapt the
speed of the appliance to the type of work that needs
to be done.
Switch on y Switch off (Fig A)
- Turn the appliance on, by pushing the on/off but-
ton (1)
- To activate the self-locking switch press the locking
button (2) while holding down the on/off button (1).
- To turn the appliance off, press the on/off button (1)
without pressing the locking button (2)
Sanding the corner (Fig C)
- Disassemble the removable lid (10) from the pad
cover (7)
- Rotate the adjust knob (11) anti-clockwise.
- Rotate the pad cover (7) until the desired position.
- Rotate the adjust knob (11) clockwise.
- Sand the corner space.
Connection set for dust outlet (Fig E)
- Connect the dust hose (13) into the dust outlet 12
- Rotate the dust hose (13) clockwise in order to lock
it
- Attach the cloth bag (14) to the dust hose (13)
Repl
- Rem
drive
- Rep
- Inst
Use:
- Unr
- Con
- Ass
- Tur
(1).
- Plac
to wo
- Slow
- Do n
piece
- App
piece
the s
Once
- Stop
- Unp
- Clea
- Dis
low it
- Allo
task.
- Cle
conn
MER
- Clea
drops
- Do
base
clean
- Do
air ve
applia
- Nev
other
- If th
ness,
the d
beco
Supp
- Alw
for yo
- The