Rola J-Rac Kayak Carrier Manual Del Usuario página 4

24" Minimum
TOP OF VEHICLE
​
Cequent Performance Products, Inc.
Plymouth, MI 48170
Technical Service: (888) 521-0510
Installation Instructions
J-Rac Kayak Carrier | Product Code: 59912
Push the clamp bracket (F) against
the bottom of your crossbar,
underneath the J-Rac, and feed the
carriage bolts (H) down through the
holes of the clamp bracket.
Screw the clamp knobs (G) back
onto the carriage bolts (H) until snug,
but do not tighten down.
Repeat steps 2 - 6 for securing the
second J-Rac to the rear crossbar.
Ensure that your crossbars are a
minimum 24" apart from each other
(the further apart, the more stable
your watercraft will be).
Align the J-Racs, making sure the
placement is the same on the front
and rear crossbars.
Page 4 of 9
5
6
7
8
59912N Rev A 2/15