Tabla de contenido
Publicidad
Fitting the dust collection tube
When blowing out drill holes, the drilling debris is blown in
the direction of the operator. For this reason, it is recom-
mended that you fit the dust collection tube (11) over the
drill hole nozzle (10).
– Place the recesses (13) of the dust collection tube (11)
over the outer bayonet lock (12) of the drill hole nozzle
(10).
– Turn the dust collection tube (11) a quarter turn clock-
wise.
Operation
Remove the battery before cleaning or performing
u
maintenance work on the power tool, before making
tool adjustments, changing accessories or storing the
power tool. This safety measure prevents the power tool
from being started accidentally.
Starting Operation
Switching on/off
– To switch on the power tool, press the on/off switch (1)
into position I or II.
Position I: For blowing light materials.
Position II: For blowing heavy materials.
– To switch off, push the on/off switch (1) into the stop in
position "0".
Working Advice
Never blow dirt in the direction of bystanders.
Always hold the power tool approx. 3 cm above the ground
when working.
Do not blow hot, flammable or explosive material.
Ensure that the air inlet (4) cannot suck in any impurities
while blowing is taking place.
Maintenance and Service
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
Bosch Power Tools
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
English | 13
1 609 92A 4YD | (05.09.2019)
Publicidad
Tabla de contenido
