LSI WPSLS Serie Instrucciones De Instalación Y Montaje

Idiomas disponibles

Descargar este manual

INSTALLATION AND ASSEMBLY INSTRUCTIONS

WPSLS | WPSLL Series

IMPORTANT: READ BEFORE REMOVING FIXTURE FROM CARTON. RETAIN

FOR FUTURE REFERENCE

SAFETY: This fixture must be wired in accordance with the NATIONAL ELECTRICAL CODE and

applicable local codes and ordinances. A person familiar with the construction and operation of the

product and the hazards involved must install this product. A qualified licensed electrician should

complete all work. Proper grounding is required for safety.

WARNING: Make certain power is OFF before installing or maintaining fixture.

RISK OF INJURY: Fixture may become damaged and/or unstable if not installed properly.

MOUNTING

NOTE: Turn off electrical supply at the breaker. Follow all local electrical codes for wiring and grounding requirements

Fig. 1

1. Unscrew door with Phillips screw driver (Fig. 1). Remove door from back box (Fig. 2A). Using the leveling bubble in the wall

mounting box, level the fixture (Fig. 2B). Mount back box to junction box or wall Mounting (hardware not provided).

2. Feed supply wires through the center knock out.

3. Wire the fixture using provided wire connectors.

4. Seal with weatherproof silicone sealant to prevent moisture from entering the fixture.

5. Secure door to back box by placing hinges back together (Fig. 3). Tightening door screws to seal fixture (Fig.1).

NOTE: Optional 0-10 V Dimming. Dimming provided through grey & purple wires. Refer to control manufacturer for wiring instructions.

240-250LSI Rev. 05/17

Fig. 2A

Installation Questions?

Call LSI Field Service Department at:

1-800-436-7800 Ext. 3300

Fax: 1-877-861-1368

Fig. 3

Fig. 2B

Página 1 5. Secure door to back box by placing hinges back together (Fig. 3). Tightening door screws to seal fixture (Fig.1). NOTE: Optional 0-10 V Dimming. Dimming provided through grey & purple wires. Refer to control manufacturer for wiring instructions. Installation Questions? Call LSI Field Service Department at: 1-800-436-7800 Ext. 3300 Fax: 1-877-861-1368 240-250LSI Rev.
Página 2 5. Asegure la puerta de la caja posterior mediante la colocación de las bisagras de nuevo juntos (Fig. 3). Apretar tornillos de la puerta para sellar dispositivo (Fig. 1). Preguntas de instalación? Llame al Departamento de Servicio de Campo de LSI en: 1-800-436-7800 Ext. 3300 Fax: 1-877-861-1368 240-250LSI Rev.

Wpsll serie