Waldbeck 10032298 Manual Del Usario página 15

Accessories
• Attachment 1 function Is suitable ball lnflator. For example: basketball,
football and so on.
• Attachment 2 function is suitable balloon, air cushion and so on.
• Attachment 3 can be used to inflate bicycle hoses.
Inflating Items with Additional Tips
1. Loosen the attachment lock approximately 3 rotations counter-clockwise
(See Fig 6). Do not remove lock completely.
2. IMPORTANT: Insert the tip into the attachment lock. Press in firmly while
screwing in clockwise until it can go no further (See Fig 7).
3. Tighten attachment lock clockwise until hand-tight.
4. Press the Power button below the LCD display to tum on. (See Fig 8)
Note: After 30 seconds of inactivify the digital fire gauge will tum off
automatically to conserve energy.
5. Insert the tip adapter into inflatable object and push trigger.
6. Allow the unit to run until fully inflated.
7. Remove tip adapter from the inflated object quickly, and replace valve
cover if required.
Note: The pressure gauge will only provide an estimated reading.
EN
15