AbleNet BIG Step-by-Step Guia De Inicio Rapido

Quickstart Guide:
BIG Step-by-Step™ and LITTLE Step-by-Step™
communicators
LITTLE/BIG Step-by-Step
LITTLE/BIG Step-by-Step
Select Level / Enter Record Mode
3
Press and Hold,
then Release
Levels switch
(applicable models)*
LITTLE Step-by-Step w/Levels shown
Select Desired level (applicable models) using the Level
switch on the side of the device. Press and Hold the
RECORD button until the RECORD Light activates, then
release.
Choose your Switch Color
1
TM
TM w/Levels
Firmly, rotate the colored switch top counter-clockwise
to remove. Attach a new color by rotating the cap
clockwise until it stops.
A Snap Switch Cap is included with your BIG or LITTLE
Step-by-Step. Place a picture or symbol on the switch top,
and secure by snapping your Switch Cap over it.
Record a Series of Messages
4
Repeat
RECORD OFF SWITCH TOY/APPL.
Press and Hold the switch top, begin speaking when you
hear a beep. Release when finished. Repeat for
additional messages in a sequence.
Note: RECORD Light will flash while recording.
Insert Batteries and Turn On
2
On
Connect one 9-volt battery at the bottom of the device.
Rotate the Volume ON/OFF knob to turn the device on.
The LITTLE Step-by-Step includes a detachable Mounting
Base that must be removed to access the battery door.
Press the tab and slide to remove the base.
Exit Record Mode
5
Repeat
Press and Release
Press and Release the RECORD button to exit Record
Mode. Your BIG or LITTLE Step-by-Step is ready for use.
NOTE: Depending on your model, your device will have either
2 minutes or 4 minutes of recording time. The RECORD light
will turn yellow and flash when only 10 seconds of recording
time remains.
On
RECORD OFF SWITCH TOY/APPL.