Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly- QTY 1
2. Exhaust Duct - QTY 1
Bottom Mounting R ail – QTY 2
3. Screw A - QTY 11+3 extra
4. Screw B - QTY 4+2 extra
CHOOSING A LOCATION FOR YOUR
MICROWAVE OVEN IF BUILT-IN
Built-In Trim Kit allows for the installation of microwaves
listed below to be built into a cabinet or wall by itself or
over an electric wall oven*.
Microwave Models:
104.621.61
104.660.03
904.621.62
904.660.04
See Illustration 1 for proper location and when building
in above a wall oven. Carefully follow both the wall
oven assembly instructions and
Kit instructions. If building over a wall oven, be sure
the clearance between the wall oven and the microwave
oven is a minimum of 3 inches.See illustration 2.
*NOTE: Trim Kit and microwave can only be built-
in over an electric self-clean or non self-
clean single cavity wall oven.
CABINET OR WALL CUTOUT
Cutout Dimensions( See illustration 3)
Height (A)
Minimum
16 3/4" (42.5 cm)
Maximum
17" (43.2 cm)
Width (B)
Minimum
24 3/4" (62.9 cm)
Maximum
25" ( 63.5 cm)
Depth (C)
Minimum
20" (50.8 cm)
IMPORTANT:
Before installing the exhaust duct, confirm the
floor is level.
The level bubble should be equal distance from
level guide lines.
IKEA
's Built-in
ASSEMBLY INSTRUCTIONS
Illustration 1
Illustration 2
Trim Kit Overall Dimensions
Height
Width
Depth
18" (458mm)
30" (762mm)
1 1/2" (38.9cm)
5
Publicidad
