Safety Precautions; Notice For Installation - Electrolux EXI09HD1W Manual De Instalación

Safety precautions

Please ready this installation manual and the
user manual before installation and carefully
store in a handy place for later reference.
on how to use and maintain your air conditioner
properly.
Electrical work must be installed by a licensed
electrician. Be sure to use the correct rating of
the power plug and main circuit for the model to
be installed.
Incorrect installation due to ignoring this
instruction will cause harm or damage, and
indications.
Meanings of symbols used in this manual are
shown below:
warning
This symbol indicates information concerning
your personal safety.
caution
This indicates information concerning your
personal safetyand how to avoid damaging the
appliance.
tips and information
This symbol indicates tips and information
about use of the appliance.
environmental tip
This symbol indicates tips and information
about economical and ecological use of the
appliance.
This symbol indicates never to do this.
Always do this.

Notice for Installation

caution
1
refrigeration mechanic and electrical work
to local or government regulations and in
compliance with this manual.
2
conditioner installer. Otherwise, the malfunction
may not be solved due to faulty installation.
3 If the power cord is damaged, replacement work
shall be performed by authorised personnel only.
4 An all-pole disconnection switch having a
contact separation of at least 3mm in all poles
with a power plug, make sure the plug is within
reach after installation.
5 The temperature of refrigerant circuit will be
high, please keep the interconnection cable
away from the copper tube.
6 This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Young children should be supervised to ensure
that they do not play with the air conditioner.
7 If the unit is to be moved to another location or
permitted to undertake such work.
8
when adjusting vertical louvers.
9 This air conditioner uses R22 or R410A
3