Continental Platinum CP43219 Guia De Inicio Rapido página 3

This product is only for family use.
Please read these instructions carefully to get the best results from your appliance.
Before connecting the appliance, please check if the voltage indicated on the
bottom of the appliance is in accordance with the main voltage in your home.
Please locate the appliance and plug accessible to the power socket.
Warning: This appliance must be earthed.
Keep the appliance away from children.
The socket used should be in accordance with the plug of the appliance.
Make sure that the temperature controller is on the position of "off" before plugging.
After plugging into the power socket, the indicator "POWER" comes on, showing
the appliance is powered. When only the indicator "POWER" comes on, the
appliance is not heated. If the using temperature exceeds rated temperature after
use, the indicator "POWER" still works and at this time, the appliance maybe very
hot.
•Do not heat without food inside.
•Do not open the lid when frying.
•The surface is hot when frying. Never touch the fryer before it's cooled to avoid
scald.
•Before first use, please check carefully if all the parts of the appliance are in
good condition. If not, please contact the supplier or manufacturer. Never use this
appliance if it is not in good condition.
Using your fryer
1. Introducing the oil or fat
•Open the top lid.
•Lift the basket using the handle.
•Place approximately 1.1 liters of oil or 0.7 kg of hard fat into the fryer body (the
level must always be between the two marks on the oil container wall).
•If you use blocks of fat, cut them into pieces before placing them in the body.
•Set switch of the temperature controller to 140˚(the red Indicator light comes on).
To melt the fat needs roughly 8 minutes.
•Never attempt to melt fat in the basket.
2.Cooking
•Plug in the fryer; the indicator "POWER" comes on.
•Set the temperature controller to the desired temperature depending on what you
are going to cook, the indicator "HEAT" comes on.
•When the indicator "HEAT" goes out (after approx. 5-7 minutes) the fryer has
reached the corresponding temperature. Open the top lid.
•Attach the handle into basket.
•Put the food in the basket.
•Lower the basket into the oil slowly; watching the oil level and foam in order to
keep them from reaching the fringe of the oil container confirming the oil level is
appropriate. Detach the handle. Close the lid.
•When the food is cooked, turn anticlockwise the temperature controller to the
position "OFF"; the indicator "HEAT" goes out. Unplug the fryer or shut the power
socket; the indicator "POWER" goes out. Open the lid. Attach the handle to
basket's support (at the top of the basket's body), raise the basket and drain the oil.
•When cooking, the temperature controller will heat or stop heating according to
the set temperature; the "HEAT" indicator light will flicker.