Descargar Imprimir esta página

Zodiac 7004.N Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Chronograph 3 Eye
(Model 5030 .D / 5040 .B)
Hour hand
Second hand
Date
Hour hand
Second hand
Setting the time
1 . Pull crown out to position III (the watch stops) .
2 . Turn crown until you reach the correct time .
3 . Push crown back into position I .
Setting the date
1 . Pull crown out to position II (the watch continues to run) .
2 . Turn crown until yesterday's date appears .
3 . Pull crown out to position III (the watch stops) .
4 . Turn crown until correct date appears .
5 . Continue to turn crown until correct time appears .
6 . Push crown back into position I .
All manuals and user guides at all-guides.com
Minute hand
I
II III
Crown
Date
5030.D
Minute hand
I
II III
Crown
5040.B
10
Chronograph
The chronograph's hour counter measures time up to 12 hours.
The minute counter measures 30 minutes per rotation.
The center stop-second measures 60 seconds per rotation.
Center stop-second
Minute counter
Hour counter
Please note:
Before using the chronograph functions, please ensure that:
- the crown is in position I (= normal position).
- the three chronograph hands are precisely at zero position following
activation of pusher B. Should this not be the case, the positions of
the hands must be adjusted (see the chapter entitled "Adjusting the
chronograph hands to zero position").
Chronograph: Basic function
(Start / Stop / Reset)
1 . Press pusher A to start the center stop-second hand .
2 . To stop the timing, press pusher A again .
3 . To reset the three chronograph hands to zero positioning, press
pusher B .
Chronograph: Intermediate or interval timing
1 . Press pusher A to start the center stop-second hand .
2 . Press pusher B to stop the chronograph .
Note: Although the chronograph hands have stopped, the movement
continues to record the current timing.
3 . Make up the measured time:
Press pusher B again and the 3 chronograph hands are quickly
advanced to the ongoing measured time . To continue to record
intervals, continue to push pusher B .
Pusher A
I
II
III
Crown
Pusher B
11

Publicidad

loading