Starlyf 5821214 Manual De Instrucciones página 8

31. The device emits very hot steam.
That means that the steam cleaning
head and the microfibre cloth can
become very hot during use.
Precaution!: Always wear suitable
footwear when using the steam mop
and when changing accessories. Do
not wear open-toe slippers or simi-
lar footwear.
32. The water tank cover can heat up
during use.
33. This device should be used with
care. DO NOT touch any of the parts
that can heat up during use.
34. Do not use the device if the mi-
crofibre cloth is not firmly attached.
COMPONENTS
A Main unit
B Handle tube
C Handle
D Squeegee for window cleaning
E Small round brush
F Large round brush
G Accessory adapter
H Angled nozzle
I Accessory for cleaning joints
J Scoop nozzle
K Measuring cup
L Microfibre cloth
M Cloth for textiles
N Steam cleaning head
O Rug and carpet accessory
Product view
1 Handle grip area
2 Cable hook
3 Lower part of the handle
4 ON/OFF (O/I) button with LED light
5 Water tank cover
6 Water tank button
7 Water tank
8 Steam control knob
9 Space for water tank
10 Pilot light
11 Power cable
12 Handle tube button
13 Main unit
14 Lock button (on main unit)
15 Steam cleaning head
16 Head ball joint
Technical Features and Specifications
Features
• Adjustable steam output
• Foldable
• Detachable
• Removable water tank
• Generates steam for 20 minutes of work.
• With a pilot light that indicates when the device is
ready to be used. When the steam mop is plugged
into the mains socket, press the ON button. The pilot
light will turn blue when the device is ready to release
steam.
• Increased angle of rotation of the device.
• It can be used with a wide range of accessories.
Technical Specifications
• Rated voltage: 220-240 V
• Rated frequency: 50 Hz
• Output power: 1500 W (+5%, -10%)
• Water tank capacity: 300 ml
• Water protection rating: IPX4
Product protected against splashing water and
moisture. IPX4: water protection rating.
ASSEMBLY
IMPORTANT: Each steam mop undergoes exhaustive
testing in the factory to ensure optimal effectiveness
and safety.
WARNING!: Before trying to perform any of the fo-
llowing operations, ensure the device is switched OFF
and unplugged. Also be sure to check that it is not hot
and the tank is empty or almost completely empty.
Attaching the Handle
● Insert the handle (C) into the handle tube (B). You
should hear a click to indicate that the two parts are
joined.
● Insert the resulting part in the main unit. You should
hear a click to indicate that the two parts are joined.
● For easy storage, the handle can be detached from
the steam mop by pressing the handle tube button (12).
Attaching the Steam Cleaning Head
● Push the lower part of the main unit towards the
steam cleaning head (N) until the ball joint (16) is pro-
perly positioned and you hear a click.
● The steam cleaning head (N) can be detached from
the main unit by pressing the lock button (14) on the
main unit.
Attaching the Microfibre Cloth
• Thanks to the pointed design of the steam cleaning
head (N), all you have to do is place the microfibre
cloth (L) under the head to attach it.
• To remove it, step on the tab of the microfibre cloth
with the tip of your shoe and firmly press downward.
Attaching the Rug and Carpet Accessory
Press the steam cleaning head (N) with the microfibre
cloth (L) in place against the rug and carpet accessory
(O) until it is firmly attached.
IMPORTANT: for the accessory to be firmly atta-
ched, it is very important that the tip of the mop
does not stick out in the front. The accessory must
be attached starting at the back.
• To remove it, step on the tab of the microfibre cloth
with the tip of your shoe and firmly press downward
so that the rug and carpet accessory is detached from
the head.
PREPARATION AND USES
1. Fill the water tank
Option 1: Open the water tank cover (5) by turning it
anti-clockwise.
Use the measuring cup to add 300 ml of water. Then
close the water tank cover (5) by turning it clockwise.
Option 2: