The Skin Tone Sensor - Smoothskin PURE FIT Manual Del Usuario

C) Press the activation button. The device will flash, and a warm sensation should be felt.
D) Move the handset to the next area to be treated and repeat. The device needs to recharge
between flashes.
E) Ensure that the ENTIRE AREA receives treatment, but DO NOT overlap treatment pulses.
Treatment
Window
Full Coverage
24
Overlapping Missed Areas
STEP 4: YOUR SMOOTHSKIN PURE FIT TREATMENT
SCHEDULE
For optimal results, SmoothSkin Pure Fit should be
used every week for 12 weeks to ensure all hair
follicles are treated.
After the initial treatment phase (12 weekly treatments),
to maintain results we recommend SmoothSkin Pure
Fit is used once a month, or as required.
STEP 5: SWITCHING OFF SMOOTHSKIN PURE FIT
When the treatment is finished, SmoothSkin Pure Fit should be unplugged from the power supply,
and the electrical outlet.
Refer to section 13 for details of how best to look after your SmoothSkin Pure Fit.

9. THE SKIN TONE SENSOR

The skin tone sensor measures the colour of your skin and sets the correct level of output power
needed. If your skin is too dark for treatment with SmoothSkin Pure Fit, the skin tone sensor will detect
this and prevent the unit from operating. RED lights will be shown in the power bar if your skin is too
dark. The status of the skin tone sensor can be seen on the power bars located on both sides of the
handset. If a valid skin tone is detected, the power bars will illuminate WHITE. The number of lights
illuminated will be dependent upon your exact skin tone.
TREAT 7 DAYS TREAT
Always wait 7 days before
treating the same area again
25