ForaCare Pro Voice V9 Manual Del Propietário página 14

3. Deleting the memory
With "dEL" and a flashing " " on the
display, press SET to keep the results in
memory and skip this step.
To delete all the results, press Main
button. Then a flashing "dEL" and " "
are displayed on the meter. Press Main
button again to delete all results and
then "---" and " " are displayed. The
following " " means that all data are
deleted.
4. Setting the speaking volume
There are seven (7) speaking volume
options to choose from. Press Main
button until the desired speaking volume
appears. To confirm your selection, press
SET.
Volume 0 indicates that the speaking
function is turned off, and " " will
not display during testing. Volume 1
to 7 indicates speaking volume from
low to high, and " " will be displayed
throughout the testing.
14