Switching On The Product - nedis ACAM07BK Guia De Inicio Rapido

2. Insert the battery A
Remove the battery by pulling the battery label A
4
3. Close the battery compartment with A
Make sure to match the (+) and (-) polarity markings.
4
Charging the product (image D)
-
Only use the provided USB charging cable.
The product is delivered with a partially charged battery. For optimal battery
4
life, fully charge the battery before first use.
The battery recharging time is variable depending on the condition and
4
capacity of the battery.
The product can be charged while recording video.
4
1. Plug the micro USB cable A
2. Plug the other end of A
Charging starts automatically.
4
The charging indicator LED A
4
When the battery level is low, a low battery notification is shown on the
4
screen and the product turns off.
Attachment
Place the product in the waterproof housing. The waterproof housing can
be fitted with the supplied mounting accessory to your clothing, action gear,
helmet, etc.
Make sure the attachment is secure.
Make sure the product does not impede your movement, view, or operation of
your action gear.
Only operate the product while you are safe and still.
4

Switching on the product

1. Press and hold the power button A
product.
The status indicator LED A
4
A welcome screen appears, and the product enters video mode.
Switching between modes
Switch between modes by pressing the power button A
in the battery compartment.
u
into the micro USB port of the product A
y
y into a USB power source or adapter.
5 lights up.
1
4 lights up blue.
i
.
8
for 3 - 5 seconds to switch on the
1
9
.
r
.
.