Mark Hole Locations; Mark And Cut Vent Opening - Samsung LIB0168579 Guía De Instrucciones Para Instalación

Installation Instructions

Mark Hole Locations

1. Determine and clearly mark a vertical centerline on the wall and
cabinet bottom.
A
To wire through top:
1. Mark a line distance (A) from the right of the centerline on the under-
side of the wall. Mark the point on this line that is 2" (5.08 cm) from
the underside of the cabinet. Drill a
through the rear wall at this point.
To wire through wall:
1. Mark a line distance (A) from the right of the centerline on the under-
side of the wall. Mark the point on this line that is
the underside of the cabinet. Drill a
through the rear wall at this point.
⁄ " (2.2 cm) diameter hole (B)
7
8
A A A
2"
(5.08 cm)
B
A. 8 2/5" (21.3cm)
⁄ " (2.2 cm) from
7
8
⁄ " (2.2 cm) diameter hole (B)
7
8
B
7⁄8"
(2.2 cm)
A
A. 8 2/5" (21.3cm)

Mark and Cut Vent Opening

For a non-vented (recirculating) installation: skip "Mark and Cut Vent
Opening" step.
For 3¼" x 10" (8.3 x 25.4 cm) Rectangular Vent System
Roof Venting
To make a 4" x 10½" (10.16 cm x 26.7 cm) rectangular cutout on the
underside of cabinet top and bottom:
1. Mark lines 1½" (3.95 cm) and 4
the centerline of the underside of cabinet. Mark lines 5¼" (13.3 cm)
to the right and left of the centerline on the underside of cabinet.
Centerline
Cabinet cutouts
*4
4
(12.25 cm)
2. Use saber or keyhole saw to cut a rectangular opening for vent.
3. Repeat steps 1-3 for the underside of the top of the cabinet.
Wall Venting
To make a 3½" x 10½" (8.9 cm x 26.7 cm) rectangle in the wall:
1. Make 2 lines by measuring
4.2
from underside of cabinet and mark on the centerline on the back
wall.
2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the
wall.
3 ⁄ "
7
10
(9.4 cm)
5 /
1
4
(13.3 cm )
Centerline
3. Use saber or keyhole saw to cut a rectangular opening in the wall for
the vent.
For 7" (17.8 cm) Round Vent System (Roof Venting)
To make a circular vent opening on the underside of the cabinet top:
1. Mark a centerline on the underside of the top of cabinet.
2. Mark a line 5" (12.8 cm) from the back wall on the underside of the
top of cabinet.
3. Use a compass or a circle template to draw a circle with a diameter of
7½" (19 cm).
⁄ " (12.25 cm) from the back wall on
4
5
*1 / (3.95 cm)
1
2
/
5 /
1
5
4
(13.3 cm)
5 /
1
4
(13.3 cm)
*From wall, not cabinet frame
⁄ " (1.1 cm) and 3 ⁄ " (9.4 cm) down
.7
10 10
⁄
"
4.2
10
(1.1 cm)
" 5 / "
1
4
(13.3 cm )
English 9