EN
68
SETTING ALARMS AND TIMERS
Setting an alarm
1. Press and hold the Menu button on main unit or remote control and turn
and press the Select dial to select 'Main Menu'..
2. Turn and press the Select NAVIGATE to select 'Alarms'
3. Turn and press the Select NAVIGATE to select 'Alarm 1' or 'Alarm 2'.
4. Turn the Select dial to scroll through each alarm setting. If you want to
change a setting, press the Select dial. You can set the following alarm
options:
Enable
Turn and press the Select NAVIGATE to choose when
you want the alarm to repeat. The available options
are 'Off ','Daily', 'Once', 'Weekends' or 'Weekdays'.
Time
Turn and press the Select NAVIGATE to adjust the
hour of the alarm. Note: If you have set to use the 12
hour time format, make sure that you select the 'AM'
or 'PM' version of the hour before pressing the Select
dial. Repeat to set the minutes of the alarm.
Mode
Turn and press the Select NAVIGATE to choose
between 'Buzz', 'Internet radio', 'DAB', 'FM' , 'CD'.
Volume
Turn and press the Select NAVIGATE to set the
volume when the alarm sounds.
Save
Turn and press the Select NAVIGATE to save the
alarm.
Time and date settings
The clock will automatically set itself using your Network, digital or FM
radio signal. If the time or date does not update automatically, you can
manually set it using this option.
Note: Any time or date updates received by a digital broadcast will override
manual settings.
Setting the time and date manually
1. Press and hold the Menu button to view the main menu.
2. Turn and press the Select NAVIGATE to select 'System settings' > 'Time/
Date'.
3. Turn and press the Select NAVIGATE to choose 'Set Time/Date'.
4. Turn and press the Select NAVIGATE to set the day of the month. Repeat
to set the month and year.