Design Information; Product Dimensions And Clearances - Design CAFE CGY366 Instrucciones De Instalación

PRODUCT DIMENSIONS AND CLEARANCES

Width
Front of Bullnose
Height to trim.
Trim to be flush
or higher than
countertop.
to Front of Door
WARNING
hood require 60" minimum to combustibles.
horizontal combustible surfaces must have
an Auto-On feature. Refer to hood installation
instructions for specific hood clearances.
other stone.
CAUTION
To prevent drafts from
in floor under appliance and behind
** As defined in the National Fuel Gas Code (ANSI
from non-combustible materials are not part of the
CSA. Clearances less than 12" must be approved by
ADDITIONAL CLEARANCES:
each side.
Working areas adjacent to the rangetop should have
cutout to back edge of countertop and 3 in. minimum
4

Design Information

1"
Countertop
to Cooking
Surface
leg Height
16"
Universal Utility Locations
14"
3"
Electric
36"
36" Minimum
60" Minimum
to Combustibles
Non-
Combustible
Material **
12"
Minimum
Each Side
36" Min.
Back
3" Min.
Island
Cutout
2"
12" Minimum
to Adjacent Wall
18"
Min.
3" Min.
31-2000814 Rev. 1