Conceptronic CBTHS3 Guia Del Usuario página 14

ENGLISH
5. Using the Bluetooth
Turning on and off:
If the Headset is turned off, press button "2" (Blue) for 2 seconds to
turn the Headset on.
When the Headset is turned on, it will automatically connect to the
mobile phone.
If the Headset is turned on, press button "2" (Blue) for 3 seconds to
turn the Headset off.
Accept, end and reject calls:
When you receive an incoming call, you will hear a ringtone through
the Headset. To accept an incoming call, press button "2" (Blue)
shortly.
Note: Some mobile phones automatically disconnect the headset if
the connection is not used for a while. In this case, the
headset will not ring when there is an incoming call. Press
button "2" (Blue) to reconnect with the mobile phone. Press
button "2" (Blue) again to accept the incoming call.
To end a call, press button "2" (Blue) shortly.
To reject an incoming call, press button "2" (Blue) for 3 seconds.
Adjust the volume during calls:
To increase the volume of the Headset, press button "5".
To decrease the volume of the Headset, press button "4".
You can also adjust the volume on your mobile phone.
®
Headset
14