DeLonghi DINAMICA plus ECAM37095 Manual Del Usuario página 24

DISPLAYED MESSAGE
INSERT WATER SPOUT
INSERT MILK CONTAINER
INSERT INFUSER ASSEMBLY
WATER CIRCUIT EMPTY
PRESS OK TO START
POSSIBLE CAUSE
The hot water spout (D6) is not inserted or is
inserted incorrectly
The milk container (E) is not inserted correctly.
The infuser (A20) has not been replaced after
cleaning.
The water circuit is empty
:
REMEDY
Insert the water spout as far as it will go.
Insert the milk container, pushing it as far as
it will go.
Insert the infuser as described in section "14.9
Cleaning the infuser".
Press the selector corresponding to "OK" to
deliver water from the spout (D6) until it ows
out normally.
If the problem persists, make sure the water
tank (A17) is fully inserted.
24