Oh!FX CO2 GUN Manual De Instrucciones página 3

5. To shoot the CO2 Gun, pull fi rmly the trigger (2) for some seconds.
6. It is recommended to keep the trigger pull for no more than about 10 seconds.
DISASSEMBLY
1. For disassembly, the hose must be without pressure. For this purpose, close the CO2 gas
bottle and turn On the CO2 GUN to release all the gas inside before you disconnect the
hose.
REMARKS
• Remember that in order to have the white smoke eff ect, you must use liquid CO2, that is
the CO2 bottles with a probe or pipe inside.
• To obtain a nice eff ect of white cryogenic smoke, it is necessary that there is a minimum
humidity of 40% in the air. Otherwise the white smoke doesn't appears visible
GENERAL CAUTION FOR CO2 GUN
• The CO2 GUN has been designed for the eff ect described. Any other use, diff erent from
the written excludes Oh!FX (CONFETTISHOTS SLU) of liability and warranty.
• Use always the CO2 GUN in open spaces or indoors with good ventilation. Never use
it in enclosed spaces without ventilation because the concentration of CO2 can cause
suff ocation. If you have doubts about the features of the enclosure use a meter to measure
CO2 concentration.
• Always use hoses and connections of the high pressure provided by the distributor and
duly certifi ed.
• During and after the shot you can freeze the nozzle (CO2 output). Do not touch that part
as it can cause burns.
• Do not point or fi re directly at anyone at less than 4 meters away.
• In case of a leak or malfunction, do not attempt to disassemble the machine and contact
the distributor or manufacturer. Any manipulation may exclude the warranty
• Do not wet the machine. To clean it, use a damp cloth and dry it immediately.
• Only one adult and qualifi ed person must manipulate the machine.
3
INSTRUCTION MANUAL