Safety System; Main Components; Cleaning And Maintenance - SOLAC TH8310 Instrucciones De Uso

SAFETY SYSTEM

• The appliance is equipped with an OVERHEATING DISCONNECTION system.
If a problem occurs, this system automatically switches off the appliance. If
this happens, proceed as follows:
1) Unplug the appliance from the mains.
2) Allow it to cool for 15 minutes.
3) Ensure that there is no dust or other obstacles that obstruct the air flow.
4) Clean the intake grill (3) with a vacuum cleaner, if necessary.
• If the appliance still fails to work as normal, please contact the technical
service centre.

MAIN COMPONENTS

1. Power selector control
2. Temperature regulator
3. Grill
USER INSTRUCTIONS
• Connect your fan heater to the mains.
• Turn the temperature regulator control (2) to high.
• Place the power selector control (1) in the desired position:
* Medium power
**High power
• When the room has reached the desired temperature, slowly turn the tem-
perature regulator (2) clockwise until a soft "click" is heard. The fan heater
will switch off. The appliance will switch on and off in order to maintain the
right temperature in the room.
• In order to turn off the fan heater, place the power selector (1) in position
0, and disconnect the appliance from the mains.
• In order to prevent temperatures below 0º C in the room, select position *
on the temperature regulator (2), and place the power selector (1) in the
medium power position.

CLEANING AND MAINTENANCE

• Before cleaning the appliance, make sure it is switched off and unplugged
from the mains.
• Allow it to cool.
TermoventiladorTH8310-ok 9
9
11/6/07, 10:13:36