Recording; Vcr Recording - RCA DRC8335 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DRC8335_EN(verB)
7/23/07

Recording

VCR recording

Make sure the VCR is selected with the VCR
indicator turned ON when using the remote control
to perform the below operations. If the indicator is
off, press VCR on the remote control to activate the VCR.
1. Insert a recordable tape into the tape deck.
2. If necessary, change the tape speed by pressing RECORD
QUALITY on the remote control. The selected tape speed
shows briefly on the TV screen.
SP = Standard play, SLP = Super long play (around x2 to
x3 the recording time as the tape indicates)
3. Refer to the instructions on page 14 to watch TV and
change channel, or select viewing a device connected to
your unit (e.g. camcorder).
4. Press VHS REC on the unit or REC on the remote control
to start recording.
Press either key to
start VCR recording
5. Press PAUSE to pause recording. Press VHS REC or REC
to resume.
6. Press STOP/EJECT or STOP to stop recording.
3:36 PM
Page 17
VCR
Press this
indicator
button
Make sure the safety tab of the tape is in place.
Recording is not possible if the safety tab is
removed. If the safety tab
is removed and you want
to record, simply cover the
hole with adhesive tape.
Safety tab
15
EN

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido