Taurus ALPATEC BABEL INFINITE Manual Del Usuario página 8

- Fix the base to the body with the 4 screws
provided (Fig. 3).
- Stand the appliance up again and check that
the base works properly.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Prepare the appliance according to the function
you wish to use:
USE:
- Extend the cable completely before plugging
it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off
button (1/a).
- Select the desired speed.
FAN FUNCTION:
- Select the desired ventilation speed pressing
the speed delector button (2/b).
- The LED indicator will show the speed selec-
ted.
WIND MODES:
- This model has three wind modes:
- Normal: The fan operates constantly at the
selected speed.
- Breeze: The fan alternates periods of more
and less power, simulating the feeling of a soft
breeze. The amplitude of these shifts depends
on the speed selected.
- Night: When the fan is at speed 3, it runs at
speed 3 for 20 minutes, then at speed 2 for 20
more minutes and finally at speed 1 until it is
turned off or the timer runs out. When the fan
is at speed 2, it runs at speed 2 for 30 minutes
and then it keeps running at speed 1 until it is
turned off or the timer runs out. When the fan
is at speed 1, it runs at speed 2 for 10 minutes
and then it turns to speed 1 until it is turned off
or the timer runs out.
- To activate this function, press the modes
button (4/d).
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
TIMER FUNCTION:
- The appliance's operating time can be control-
led (1-15h).
- To program the operating time simply select it
by pressing the timer button (5/e).
- The LED indicator will mark the selected time.
- After the selected time the appliance will switch
off automatically.
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of appro-
ximately 45º.
- To activate this function, press the oscillation
button (3/c).
- To deactivate this function, follow the procedu-
re for switching it on in reverse.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off button
(1/a).
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the back to
make it easy and convenient to transport (E).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.