Husqvarna 21007947044 Guia Del Usuario página 5

Scope of delivery
1x passenger seat cover 
1x sticker 
1x collar screw M5x10 
1x bushing 
Preliminary work on the cover
- Take off front rider's seat (see owner's manual).
- Take off passenger seat (see owner's manual).
Mounting of cover
- Disconnect plug-in connector

- Remove screw and take off the safety belt with the passenger
seat.
- Remove rubber grommets
- Remove screws  and take off the cover.
- Remove cable  with the safety belt from the brackets.
- Remove screws  .
- Push the tail light towards the rear and remove it.
- Mount rubber grommets 
- Push on the tail light and position.
- Mount and tighten screws 
- Position cable  on the bracket.
- Position safety belt.
- Mount screw  with bushing
 .
 .
on passenger seat cover 
.
 (both included) and tighten to 4 Nm.
(included).
5