Kohler K-6536 Guia De Instalacion página 7

Front Support
Frame Member
Install the front
edge of the bracket
flush with the front
frame member
Wood Screw
#8 x 1" (2.5cm)
5. Install Mounting Bracket for Optional Shroud (K-6543)
Install Wall Bracket: Install the wall bracket on the back wall
with the bottom of the bracket 14-1/4" (36.2 cm) above the floor
using four #8 x 1" wood screws and wall plugs (included) if
needed.
Install Mounting Bracket: Snap the clip-on receptacle over the
large holes in the mounting bracket as shown. Install the
mounting bracket onto the bottom of the front support frame
member using two #8 x 1" wood screws (included). The edge of
the mounting bracket should be aligned with the edge of the
front support frame member.
Kohler Co.
Back Wall
Wall Bracket
Clip-On
Receptacle
7
14-1/4"
(36.2cm)
1019951-2-A