Replacing The Air Filter; Replacing The Blade - Pulsar PTG1220D5A Manual Del Operador

Cortacésped propulsado por gasolina
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the Air Filter

Service Interval: 25 Hours
1.Unlock the latch (1) and pull upward to open the air filter
compartment (2). (Fig.14)
2
Fig. 14
2. Replace the air filter element. (Fig.15)
Fig. 15
3.Press down and lock the latch on the air filter
compartment. (Fig.16)
Fig. 16
1

Replacing the Blade

Service Interval: Yearly
Important:
You will need a torque wrench to install the
blade properly.
If you do not have a torque wrench or are
uncomfortable performing this procedure, contact an
Authorized Service Center.
Examine the blade whenever the mower runs out of fuel.
If the blade is damaged or cracked, replace it immediately.
If the blade edge is dull or nicked, have it sharpened or
replace it.
The blade is sharp. Contact with the blade can result
in serious personal injury.
· Disconnect the spark plug wire.
· Wear heavy gloves when servicing the blade.
4. Install new blade with all mounting hardware; tighten
blade bolt by turning clockwise.
Fig 17
up toward the mower deck.
5.
30-38
40-50
Correct blade hub bolt torque is very
important. Use proper tools only!
8
WARNING
7

Publicidad

Tabla de contenido
loading

Tabla de contenido