Maintenance; General Maintenance - RIDGID R829 Manual Del Operador

OpERATION
BATTERY

MAINTENANCE

bATTERIES
The battery pack for this worklight is equipped with nickel-
cadmium rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in the battery pack have been designed to
provide maximum trouble-free life. However, like all batteries,
they will eventually wear out. do not disassemble battery
pack and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
 Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
 Store the battery pack where the temperature is below
80°F.
 Store battery packs in a "discharged" condition.

GENERAL MAINTENANCE

Wipe the battery pack, flashlight, and charger with a clean, dry cloth periodically to remove any dust or debris.
ALIGN RAISED RIBS
WITH GROOVE INSIDE
WORKLIGHT BASE;
SLIDE TOGETHER UNTIL
LATCHES CLICK.
RAISED RIBS
LATCHES
Fig. 3
ADJUSTABLE
WIDE-ANGLE BEAM
(TURN ADJUSTMENT
RING CLOCKWISE)
SPOT BEAM
(TURN ADJUSTMENT RING
COUNTERCLOCKWISE)
bATTERy pACk REMOVAL ANd
pREpARATION FOR RECyCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel- cadmium
batteries. Local, state or federal
laws may prohibit disposal of nickel-
cadmium batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack's terminals
with heavy-duty adhesive tape. Do not attempt
to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
8
180° ROTATING
HEAD
BEAM
SWITCH TRIGGER
Fig. 4