User Manual
Hand Blender
Model: CE-BL029
SAVE THESE INSTRUCTIONS
WARNING
WARNING
- Check if the voltage indicated on the appliance corresponds to the local mains voltage
before you connect the appliance.
- Do not use the appliance if the mains cord, the plug or other parts are damaged.
- If the mains cord is damaged, you must have it replaced by manufacture, or the service
centre authorized by the dealer, or similarly qualified person in order to avoid a hazard.
- Always unplug the appliance from the mains before you assemble, disassemble, clean
or make adjustments to any of the accessories.
- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
Only use a moist cloth to clean the motor unit.
- Never let the appliance run unattended.
- This appliance is intended for household use only.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Never touch the blades when the appliance is plugged in. The blades are very sharp.
- If the blades get stuck, unplug the appliance before you remove the ingredients that
block the blades.
- Do not overload the appliance by putting in too much food and do not operate continu-
ously for more than 30 seconds.
PREPARE FOR USE
- Thoroughly clean the parts that come into contact with food before you use the appliance for
- Let hot ingredients cool down before you process them (max. temperature 60°C).
- Cut large ingredients into pieces of approximately 2 cm before you process them.
- Always place the motor unit on a level surface.