Rip Curl World Tide & Time Manual De Instrucciones página 8

FUTURE SUNRISE FUNCTION
If you want to know sun information for a specific date in the future until December 2026 the FUTURE
SUNRISE FUNCTION must be used.
- Press (SEARCH) to advance to SUNRISE/ SUNSET MODE.
- HOLD (START+) in for 2 seconds, the year will flash, press (START+) or (RESET-) to select the correct year.
- Press (SEARCH) the MONTH will flash, press (START+) or (RESET-) to select the correct month.
- Press (SEARCH) the DATE will flash, press (START+) or (RESET-) to select the correct date.
- HOLD (SEARCH) in for 2 seconds to save the date you want.
CHRONOGRAPH (STOP WATCH) SETTING
- Press (SEARCH) to advance to CHRONO.
- Press (START+) to start or stop the chronograph.
- Press (RESET-) to time laps while the chronograph is running. The maximum number of laps is 99.
- To reset the Chrono to zero HOLD (RESET-) in for 2 seconds.
TIMER (COUNTDOWN TIMER) SETTING
- Press (SEARCH) to advance to TIMER.
Your watch timer is preset to 30 minutes, but can be adjusted to count down from 23hr 59min 59secs. Once
the timer hits zero an alarm will sound for 30 seconds and the counter will then count upwards. This enables
you to know how long ago the alarm sounded.
- Press START/STOP to start or stop the Timer.
- HOLD LAP/RESET in for 2 seconds to reset the Timer to the preset time. You must do this prior to
being able to change the preset time of the timer.
ADJUSTING TIMER TIME to another time period, up to 23hr 59min 59secs.
- HOLD (SEARCH) in for 2 seconds, the hour digits will appear and flash. Use (START+) & (RESET-)
to select hour you want.
- Press (SEARCH), the minutes will flash. Use (START+) & (RESET-) to select minutes required.
- HOLD (SEARCH) in for 2 seconds to confirm the time set.
ALARM (X2) SETTING
A separate alarm is provided for each time zone. Ie T1 and T2.
- Press (SEARCH) to advance to ALARM.
- HOLD (SEARCH) in for 2 seconds and T1 or T2 will appear. Use (START+) & (RESET-) to select
required time zone T1 or T2.
- Press (SEARCH), the hour digits will flash. Use (START+) & (RESET-) to select required hour. Makesure
you have AM or PM correct in the alarm.
- Press (SEARCH), the minutes will flash. Use (START+) & (RESET-) to select required minutes.
- HOLD (SEARCH) in for 2 seconds to confirm the settings and the alarm icon appears in the bottom
left of the screen.
- Press (START+) to turn the alarm icon on or off.
- Press any button to stop the alarm.
18
8