Using The Crossbow Bender; Servicing And Maintenance - Virax 2500 Instrucciones De Empleo

Using the crossbow bender

Important:
Anneal the pipe over the section to be bent, do not anneal those parts of the pipe in
contact with the counter-formers (risk of deformation)
•
Select the former 1 and the cheek 2 to suit the pipe to be bent.
•
Place the former 1 at the end of the rack 4.
•
Insert the cheek 2 in the housing 3.
•
Turn the counter-formers 5 corresponding to the diameter of the pipe towards the former.
•
Place the pipe between the former and the counter-formers.
•
Work the operating handle 6 to drive the former forward until the desired bending angle is
achieved (maximum 90°).
•
Apply slight pressure to the operating handle to swing it forward.
•
Release the operating handle and move back the former to remove the pipe.

Servicing and maintenance

Clean the crossbow bender after each use.
Guarantee
The guarantee covers faulty manufacture and is limited to the replacement of defective parts.
Damages of any type are excluded, regardless of circumstances.
Our guarantee is in addition to, the statutory guarantee against hidden defects provided for in
articles 1641 to 1649 of the French civil code (code civil).
The warranty period is 2 years on all VIRAX products. It applies to all tools used under normal
conditions. It does not cover damage resulting from failure to comply with the manufacturer's
instructions or accepted good practice, inappropriate use, negligence, abnormal conditions of
use or unauthorised alterations to the products.
This guarantee shall apply from the date of sale indicated on the guarantee card returned to
VIRAX or on the distributor's invoice.. In the event of failure to return the guarantee card or
absence of proof of purchase, the guarantee shall apply from the date of the invoice from VIRAX
to the distributor.
The replacement of a part accepted as defective shall not, under any circumstances, lead to an
extension of the guarantee
Goods must be returned CARRIAGE PAID.
14