English - Kenwood WF970 Serie Manual De Instrucciones

before using for the first
time
●
Read these instructions and retain.
●
Remove all packaging and any
labels.
IMPORTANT NOTES
●
Consume filtered water immediately
or store in a refrigerator. Discard any
unused filtered water after 24 hours.
●
The filter is for treating mains tap
water only. Do not filter hot or boiling
water.
●
Clean the jug, lid and hopper
regularly, at least every time you
change the cartridge.
●
Once fitted the filter cartridge should
be kept in contact with the water.
●
If the filter has not been used for 48
hours, flush the cartridge through by
filling the hopper twice and
discarding the water.
●
Like tap water filtered water should
be boiled and cooled before being
given to babies and young infants.
●
Always check the date code on the
cartridge wrapper. If past the use by
date, discard.
●
For hygiene reasons and regardless
of usage always change the
cartridge every 30 days.

English

key
30 day cartridge life indicator
lid release
flip top lid
cartridge
hopper release lever
hopper with spout cover
jug
to use your water filter
1 Remove wrapper and immerse the
cartridge in cold water. Gently agitate
the cartridge until the air bubbles
cease and leave to soak for 10
minutes
2 Open the flip top lid and insert the
cartridge into the hopper and press
gently to seal.
3 Fill the hopper from the tap and
allow the water to filter. Discard the
filtered water
4 To set the cartridge life indicator
press and hold the button until (30)
appears on the display
5 The display will countdown
automatically. When the display
reaches '05' the display will start
flashing until it reaches '00' to
indicate that the cartridge should be
changed
blank, repeat step 4.
2
.
. Repeat.
.
. If the display is