Setting The Alarm Time - CONCORD Quartz Manual De Instrucciones

A
0
I
B
First set your reference time before
• Pull the crown to position II
• Press the push-button B. The hands of the subcounter at 6
o'clock will start to move.
• Set the right reference time by pressing the push-button B.
• Once your reference time is set, push the crown back to position 0.
• The hands of your subcounter at 6 o'clock will indicate the set-up
alarm time.
All manuals and user guides at all-guides.com

Setting the alarm time

The alarm can be set maximum 12
hours before the desired alarm time.
II
20 20 18
A
0
I
B
Setting the alarm:
short pressing (less than 1 second): the alarm time is moved forward
minute by minute.
Long pressing (longer than 2 seconds): the alarm time is moved
forward until the push-button B is released.
If the push-button B is not activated for 10 seconds, the setting mode on
the alarm time deactivates itself.
The alarm is switched on/off by briefly pressing the push-button B:
2 beeps: Alarm switched on
1 beep: Alarm switched off
Activate the setting
mode
Press the push-button B for at least
II
2 seconds. As soon as the small
minute hand jumps forward one
minute, this mode is active.
21 21 19