Be Cool Slide Instrucciones página 15

1
OPENING THE CHASIS
A:Open the catch as the arrow direction.
B:Hold the handlebar with one hand, and hold the front tube with another hand, then open
the chasis as the arrows direction until "click" sound.
2
ASSEMBLING THE FRONT WHEELS
A:Connect the front wheel to the connect pieces as the arrow direction.
B:To close the swivel-function: lift up the swivel lock button.
C:To release the front wheel: press the button on the connector pieces.
3
ASSEMBLING THE REAR WHEELS
A:Connect the rear wheels as the arrow direction.
B:To release the rear wheels: pull out the metal button and remove the rear wheels as the
arrow direction.
4
APPLYING THE BRAKES
A:To engage the brakes: step down the brake pedal.
B:To release the brakes: lift up the brake pedal with your foot.
5
FITTING AND REMOVING THE HAMMOCK
Your Slide is fitted with the pro-fix system. With this system, the hammock can be attached
perfectly to the chassis. To take the hammock off, simultaneously pull the unlocking levers
situated on both sides of the hammock (5.1 - 5.2). The hammock is reversible so it can be
positioned facing you or facing forwards
6
ADJUSTING THE HANDLEBAR HEIGHT
A:Press the buttons of bothside and pull the handlebar upwarkds or downwards.
7
FOLDING THE PUSHCHAIR
A:Furl the canopy as the arrow direction.
B:Press down the 2nd safety button and pull upwards the folding triggers on the backside of
side bars. then press down the handlebar until the pushchair is folded
C:The folding carth will work.
ATTENTION: THE PUSHCHAIR COULDN'T BE FOLDED WHEN THE HAMMOCK IS FACING
THE PUSHER AND THE HAMMOCK IS ON THE UPRIGHT POSITION!
8
OPENING THE PUSHCHAIR
A:Release the folding catch as the arrow direction and lift up the handlebar with your two
hands until "click" sound.
9
PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready to fit the following car
safety elements: Cocoon, Top, Twice and Egg. The PRO-FIX system makes it easy to fit and
detach these accessories on and off the chassis, quickly, simply and safely locking them
securely onto the chassis. To do this, carefully follow the instructions for these accessories.
WARNING: It is essential to remove the seat from the pushchair to be able to fit any of the
car accessories.
MAINTENANCE
Keep the metal parts clean and dry to prevent rusting. Grease the mobile parts and mechanisms
regularly with a silicone based spray. Do not use oil or grease. To clean the plastic parts just use
mild detergent and warm water. Do not expose the upholstery to sunlight for long periods of
time. The upholstery may be taken off for washing.
IM 1628 SLIDE.indd 15
GB
15
27/02/13 16:45