Warning Symbols - Garland Roll&Comb 141 EUS Manual De Instrucciones

that the blades are not in contact with any object
and that they can move freely.
Service the machine adequately. Check that
the moving parts are well aligned and not
tangled, that there are no broken parts or
other conditions that could affect the usage
of the machine. Repair if necessary prior to
use. A lot of accidents are caused due to poor
maintenance of the machine.
Do not use the machine in working areas
that are steep as you cannot guarantee your
personal security. When working in conditions
with a little incline, work more slowly and always
ensure that you maintain a good stability.
If the machine starts to vibrate in a strange
manner, disconnect the machine and examine
the machine to find the cause. If you cannot
detect the cause, take the machine to your
nearest after sales service. Vibrations are always
a clue as to a problem with the machine.
Maintain the handles of this machine clean and
dry. Handles that are dirty or greasy become
slippery and cause loss of control over the
machine.
Do not use this machine one handed. Hold the
handles with both hands and firmly.
Unplug the machine from the mains before
carrying out any maintenance work such as
any adjustments, accessory change or storage
of the machine. This measure ensures that the
machine cannot be accidentally started.
2.6. SERVICE
Periodically service the machine by an
authorized service dealer and only using original
spare parts and components authorized by
the manufacturer. This will guarantee that the
security of the machine will be maintained.

3. WARNING SYMBOLS

The warning symbols on the machine and in
the instruction manual provide the necessary
information for a secure and adequate use of the
machine.
Danger and attention.
Read carefully this manual before start
up.
Attention! Risk of material being
projected. Maintain yourself well clear if
not adequately protected.
Maintain passers-by well clear of
the working area.
Always use eye goggles or protecting
mask and ear protectors.
Do not use this machine in humid
conditions or if it is raining.
Attention! Before carrying out any
maintenance work or repair, unplug the
machine from the mains.
Danger of electric shock.
Caution! Unplug the machine
immediately if the cable or the switch
are damaged.
Maintain the cable well clear of the
Roll.
Risk of injuries! Remove all tooling from
the working area prior to its use.
5/32
English