Automatic Operation - Tripp-Lite SPS415HGULTRA Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING!
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness
is not recommended. Do not use this equipment within oxygen-enriched
atmospheres, or within 0.3 m (1 ft.) of a point at which an oxygen-
enriched atmosphere is intentionally vented.
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with extension
cords or adapters that eliminate the connection to ground. The
surge protector is designed for indoor use only. Install the surge
protector away from heat-emitting appliances such as radiators or
heat registers. DO NOT install where excessive moisture or other
conductive contaminants are present. DO NOT connect the surge
protector to the output receptacles of an Uninterruptable Power
Supply (UPS). Never install electrical wiring during a lightning storm.

AUTOMATIC OPERATION!

The surge protector includes a ground detection and power polarity
detection circuit with LED for added safety. When the surge protector
is plugged into a wall outlet, it detects whether a proper ground is
present. If a proper ground is detected, the green LED illuminates and
AC power is routed to the output receptacles. If a proper ground is not
detected, the LED does not illuminate and AC power is not routed to
the output receptacles. The surge protector also features an internal
protection that will disconnect the surge-protective component at
the end of its useful life. The surge protector will distribute AC power
and the LED will illuminate only when all of its surge suppression
components are functioning properly and it is connected to a properly
wired AC outlet.
2
17-04-339-933056.indb 2 5/5/2017 8:47:41 AM