ASROCK P43ME Manual Del Usuario página 21

12 24
1 13
2.7 2.7 2.7 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.7 2.7 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.8 2.8 2.8 2.8 2.8 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions
Vista Vista TM TM 64-bit Without RAID Functions 64-bit Without RAID Functions
TM TM TM
®
If you want to install Windows
your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
®
Since Windows 2000 AHCI driver is not provided by the chipset vendor,
AHCI function is not supported under Windows
2.8.1 2.8.1 2.8.1 Installing Windows Installing Windows Installing Windows
2.8.1 2.8.1 Installing Windows Installing Windows
RAID Functions RAID Functions RAID Functions RAID Functions RAID Functions
If you want to install Windows ® 2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
®
STEP 2: Install Windows 2000 / XP / XP 64-bit OS on your system.
2.8.2 2.8.2 2.8.2 2.8.2 2.8.2 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
RAID Functions RAID Functions
RAID Functions RAID Functions RAID Functions
If you want to install Windows ®
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
®
STEP 2: Install Windows Vista
ASRock P43ME Motherboard
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
® ® ® ® ®
TM
2000 / XP / XP 64-bit / Vista / Vista
®
2000.
2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
® ® ® ® ® 2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without
Advanced screen IDE Configuration.
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista 64-bit Without 64-bit Without 64-bit Without 64-bit Without 64-bit Without
® ® ® ® ® TM TM TM TM TM TM TM TM TM TM
Vista TM / Vista TM 64-bit OS on your SATA / SATAII
Advanced screen IDE Configuration.
TM TM
/ Vista 64-bit OS on your system.
/ / / / /
TM TM TM TM TM
TM
64-bit OS on
2 1 2 1 2 1 2 1 2 1