Sricam SriHome Guía De Uso Rápida página 5

FAQ1: How to add camera to app via WiFi Hotspot
Notice: Before using the WiFi hotspot to add the device in the app, you need to turn off the
3G / 4G / LTE mobile data of the smarphone first.
Step 1: Connect your phone to the camera's WiFi hotspot
1). Turn on the device and wait 30 seconds, the camera will generate a WiFi hotspot:
Camera WiFi SSID: IPC _ ******, WiFi Password: 12345678
2). Go to your phone's WLAN settings and connect your phone to the camera's WiFi hotspot.
Note: If the camera's WiFi hotspot is not found in the phone's AVAILABLE NETWORKS list,
please reset to factory settings and try again.
Wi-Fi
Settings
Wi-Fi
Sricam office
CHOOSE A NETWORK
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
IPC_*******
Boss
Sricam office
FAQ-1
Enter Password
Cancel
12345678
Password
Note: Enter WiFi
Password:12345678
FAQ-2
Wi-Fi
Join Settings
Wi-Fi
IPC_*******
CHOOSE A NETWORK
TP-LINK_AFCG
Paladin Tek-2.4G-BRTV
Sricam office123
Boss
This WLAN network has no Internet
access. Connect anyway?
CANCEL
FAQ-3
EN
CONNECT
04